Cesa laser marking solutions can be used with a variety of thermoplastics including, but not limited to: • PP • PC/ABS • Polyamide • Polyacetal (POM) Applications include: • Traceability, UPC, Branding • Food Packaging Lot Codes • Industrial Safety Tags & Equipment • Wire & Cable Part Numbers & Gauge Size • Automotive Components • PE • PET • PMMA • Polyolefins PRODUCT BULLETIN WHY LASER MARKING?

PRODUCT BULLETIN SynPlicity™ 1000 Cosmetic Ester PRODUCT DESCRIPTION Compelled by public regulation and private safety concerns, cosmetic companies that have historically used fast gelling, high solvating plasticizers are reformulating their products with bio-derived and non-phthalate chemistries.

The challenge was to develop a solution that would maintain grip when wet, be non-abrasive to the skin, stand up to UV, allow good adherence to and visibility of the board— all the while, staying true to SurfCo’s roots in both safety and performance.

It is also a preferred choice for automotive manufacturers as a warning of potential safety hazards.

Whether your application demands can be supported by the NEUSoft Express color palette or require customization, all our NEUSoft TPUs are designed with patient safety and regulatory specifications in mind, complying with ISO 10993 and USP Class VI standards.

For more on material solutions for snowmobiles, visit avient.com © 2025, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 EXTENDED PERFORMANCE Minimize Moisture Uptake from Melted Snow SOLUTION: Moisture-Resistant Long Fiber Reinforced Composites, Corrosion-Resistant Additives TACTILE EXPERIENCE Soft Touch Feel, Durable Performance, Lower Thermal Conductivity than Metals SOLUTION: Thermoplastic Elastomers (TPEs), Long Fiber Reinforced Composites THERMAL MANAGEMENT & SAFETY Heat Dissipation, Design Flexibility, Flame Retardancy SOLUTION: Thermally Conductive Formulations, Flame Retardant Additives HIGH IMPACT DURABILITY High Strength-To-Weight Ratio, Elevated and Low Temperature Performance SOLUTION: Long Carbon Fiber Reinforced Composites, Continuous Fiber Reinforced Thermoplastic Tape & Laminates COLD TEMPERATURE PERFORMANCE Cold Temperature Flexibility and Toughness SOLUTION: Thermoplastic Elastomers (TPEs), Long Fiber Reinforced Composites, Impact Modifiers WEIGHT REDUCTION 40–50% Lightweighting Compared to Metal, Exceptional Structural Properties, Extremely High Stiffness and Strength from -40° to 160°F SOLUTION: Long Carbon Fiber Reinforced Composites, Chemical Foaming Agents AESTHETIC APPEAL Custom Color and Special Effects, Paint Replacement, Color Fade Protection SOLUTION: Custom Polymer Colorants, UV Blocking Additives, Antioxidant Additives, Molded-In-Color Metallics, Scratch and Mar Performance, Laser Marking, Pre-Colored High-Gloss Thermoplastics https://www.avient.com/industries/consumer/consumer-discretionary/outdoor-recreation/powersports https://www.avient.com/products/long-fiber-technology/complet-moisture-resistant-nylons https://www.avient.com/products/polymer-additives/corrosion-resistant-additives/cesa-cor-additives https://www.avient.com/products/thermoplastic-elastomers/versaflex-thermoplastic-elastomers https://www.avient.com/products/long-fiber-technology https://www.avient.com/products/engineered-polymer-formulations/conductive-signal-radiation-shielding-formulations/therma-tech-thermally-conductive-formulations https://www.avient.com/products/polymer-additives/colorants-and-additives-wire-cable/cesa-flame-retardant-additives https://www.avient.com/products/long-fiber-technology/complet-long-carbon-fiber https://www.avient.com/products/advanced-composites/continuous-fiber-composite-tape-laminates-and-barstock/polystrand-continuous-fiber-tapes-laminates https://www.avient.com/products/thermoplastic-elastomers/onflex-thermoplastic-elastomers https://www.avient.com/products/long-fiber-technology https://www.avient.com/products/polymer-colorants/color-additive-combination-masterbatches/smartbatch-combination-colorants-additives https://www.avient.com/products/long-fiber-technology/complet-long-carbon-fiber https://www.avient.com/products/polymer-additives/foaming-agents https://www.avient.com/products/polymer-colorants/solid-color-masterbatches/oncolor-fx-special-effect-colorants https://www.avient.com/products/polymer-additives/uv-and-light-blocking-additives/cesa-light-additives https://www.avient.com/products/polymer-additives/antioxidant-additives https://www.avient.com/products/polymer-colorants/color-additive-combination-masterbatches/smartbatch-fx-paint-replacement-0 https://www.avient.com/products/polymer-additives/visual-enhancement-effects/cesa-scratch-mar-resistance-additives https://www.avient.com/products/polymer-additives/colorants-and-additives-wire-cable/cesa-laser-additives https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/artisan-pre-colored-thermoplastics-premium-finishes

IV BUILDERS FOR SHEET EXTRUSION Challenge: Melt viscosity is negatively impacted by multiple heat cycles.

Wire & cable manufacturer WIRE & CABLE MANUFACTURER A E R O N A U T I C D A T A T R A N S M I S S I O N C A B L E S • Permanent contrast marking meeting aerospace industry standards SAE AS4373F and EN-3475-706 • Benign marking that, compared to infrared (IR) laser marking, will not damage the jacket surface • Elevated temperature performance in corrosive environments, maintaining dielectric properties under continuous service • No vital optical fiber or data transmission cable interference • Demonstrated fluorinated ethylene propylene (FEP) application expertise incorporating laser marks • Provided formulation expertise in PTFE alternatives • Delivered a high-quality product with no clumping during the extrusion process • Offered a proven array of specific aeronautic colors • Provided commercial, technical, and operational support KEY REQUIREMENTS APPEARANCE + PERFORMANCE WHY AVIENT?

Provides heat stabilization • Excellent balance of properties • Natural, black or custom colors Product Code - - - PX5430 B1 PX5435 B1 PX5440 B1 PX5450 B1 Reinforcement Type - - - Glass Glass Glass Glass Reinforcement % - % - 30 35 40 50 Specific Gravity 73°F (23°C) - ISO 1183 1.13 1.18 1.23 1.35 Tensile Strength Yield MPa ISO 527 102 105 113 130 Flexural Modulus 73°F (23°C) MPa ISO 178 6500 8000 9400 11,500 Notched Izod Impact 73°F (23°C) kJ/m2 ISO 180 9.4 9.3 11.0 12.0 Heat Deflection 264 psi °C ISO 75 152 152 153 154 Product Code - - - PP5120 B270-LO MFR g/10 min ISO 1133 12 Tensile Modulus MPa ISO 527 3320 Tensile Stress Yield MPa ISO 527 32 Tensile Elongation Yield % ISO 527 4.6 Tensile Elongation Break % ISO 527 17 Flexural Modulus MPa ISO 178 3000 Charpy Impact 73°F (23°C) kJ/m2 ISO 179/1eU 38 Heat Aging 150°C h VW 44045 700 hr VOC µg/g VDA 278 23.5 Fog µg/g VDA 278 30.5 Carbon Emissions µgC/g VDA 277 18 Odor Grade VDA 270 B3 3 10 Maxxam™ Filled & Reinforced A range of melt flows to process well in sheet extrusion, thermoforming, profile extrusion and blow molding operations Impact modified EXTRUSION & BLOW MOLDING POLYPROPYLENE Product Code - - - EP6713 EP6130 EP6430 EP5240 B145 EP7920 Reinforcement - - - Talc Mineral Glass CaCO3 Glass/ Mineral Reinforcement - % - 13 30 30 40 20 Specific 73°F (23°C) - ASTM D792 0.99 1.12 1.12 1.25 1.05 Tensile Yield psi ASTM D638 4800 4200 10,000 3600 6500 MPa ISO 527 31 29 69 35 45 Tensile Yield % ASTM D638 6 8 2 5 6 Break % ASTM D638 100 110 5 70 100 Flexural 73°F (23°C) psi ASTM D790 325,000 360,000 850,000 350,000 400,000 MPa ISO 178 2250 2400 5800 2400 2750 Notched 73°F (23°C) ft-lb/in ASTM D256 4.0 1.5 4.3 1.1 2.4 kJ/m2 ISO 180 20.0 8.0 24.0 6.0 13.0 Heat 66 psi °F ASTM D648 230 242 315 240 293 °C ISO 75 110 115 157 116 145 264 psi °F ASTM D648 130 158 270 140 212 °C ISO 75 54 68 132 60 100 111.866.POLYONE www.polyone.com EXTRUSION & BLOW MOLDING POLYPROPYLENE Maxxam™ Filled & Reinforced High Density Polyethylene Specifically designed for blow molding and sheet extrusion/thermoforming of structural parts.

Polystrand composite panels are made with continuous fiber reinforced thermoplastic face sheets thermally bonded or adhered to traditional core materials such as honeycomb, foam, aluminum, and nonwovens as reinforcement.