KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified manufacturing sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal-derived substances • Available as pre-colored formulation or concentrate and for use in different polymers REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU** APPLICATION BULLETIN * Design note: Effect colors require careful consideration of part design and polymer flow paths to minimize visible flow lines.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates and ready-to-use formulations REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS DRUG DELIVERY DEVICES SYRINGES & NEEDLES DIAGNOSTICS CATHETERS Clarifying PP Sorbitol-free for transparent applications with reduced migration and improved thermal stability     Lubricant— permanent/ non-migrating Fast acting reduction in friction for wide variety of polymers such as PP, ABS, POM, PC    Protection from UV in transparent applications for PP, PE, PETG, COP UV blocking in 290-450nm with no impact on clarity; can be combined with colors (e.g., amber)   Antistatic ready-to- use solution for PP, ABS, PC/ABS Permanent/non-migrating; fast decay time independent of % relative humidity  Gamma/e-beam sterilization protection of the polymer Preserving the properties of PP and COC/COP; reduction in yellowing using Color Compensation Technology (CCT)    Reduced material consumption/cycle time—nucleation Fast acting new generation nucleant for PE and PP; improved thermal and mechanical properties allows wall thinning; reduction of tolerance/dimensional problems between different colors    Laser marking replacing ink printing/labels Solvent-free, high-speed identification for Nd/YAG laser for PE,PP, ABS, PC, POM     Antioxidants for PE, PP, TPE Thermal protection during converting/downstream sterilization    Brand protection/ anticounterfeit Covert and non-covert systems   Healthcare use limitations apply—see below.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates or formulations REGULATORY SUPPORT • Pre-tested raw materials: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS EBM/IBM CONTAINERS CLOSURES FILM COMBINATION DEVICES Clarifying PP Sorbitol-free—possibilities in packaging ocular solutions    Slip/torque reduction Slip for PE, PP films, processing aid, torque reduction for closures   Protection from UV in transparent packaging for PP, PE, PETG, COP UV blocking in 290–450nm with no impact on clarity    Antistatic ready-to-use solution for PE films e.g.

KEY CHARACTERISTICS • Designed for Nd:YAG lasers operating between 1060-1070 nm • Available for different polymers including PP, PE, PC, PBT, POM, ABS, MABS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Can be designed for dark marking on natural or white/light colored background or light marking on black/dark background REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified manufacturing sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Standard concentrates in a PE carrier and on request in PP • Pre-colored formulations can be supplied in specific resins selected for the application REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN DRUG TYPE COLOR DESCRIPTION PANTONE REFERENCE AVIENT PRODUCT CODE PE BASED Adrenergic agonist combinations Light Green 373 C PE6M176349 Adrenergic agonists Purple 2583 C PE4M176057 Anti-infectives Tan 467 C PE8M176130 Anti-inflammatory, nonsteroidal Grey Cool Grey 4 C PE7M176184 Anti-inflammatory, steroids Pink 197 C PE3M176237 Anti-inflammatory, immunomodulators Olive Green 5763 C On request Beta-blockers Yellow Yellow C PE1M176160 Beta-blocker combinations Dark Blue 281 C PE5M176272 Carbonic anhydrase inhibitors Orange 1585 C PE2M176089 Cytotoxic Black 6 C PL9M176008 Miotics Dark Green 348 C PE6M176267 Mydriatics and cycloplegics Red 1797 C PE3M176236 Prostaglandin analogues Turquoise 326 C PE5M176273 Healthcare use limitations apply—see below.

PolyOne Specialty Coatings and Inks Kennesaw, GA Plant Achieves ISO 9001-2008 Certification CLEVELAND – PolyOne today announced that its Specialty Coating and Inks plant in Kennesaw, GA recently achieved ISO 9001-2008 certification.

Mevopur Standard Colors Product Bulletin-CN3.26-1 MEVOPUR™ 着色剂 医疗应用的标准颜色 关键特性 • • • • • 监管支持 • • 预先测试的原材料库，包括： - ISO 10993 - USP , (class VI) - USP - ICHQ3D 可提取金属 - EuPh 向FDA提交的DMF / MAF文档适用于所有标 准颜色 医疗应用 • • • 医疗设备，例如导管，手术和牙科器械或药 物输送设备 药物包装，包括药瓶或瓶子 血液分析诊断或体外诊断（IVD） 产品公告 & 色卡 MEVOPUR 着色剂解决方案组合专为当今日益复 杂的医疗保健应用而设计。 ™ 在三个通过ISO 13485认证的医疗产线生产 全球统一的配方，提供全球一致性和供应链 保障 提供文件化的变更控制 原料指纹图谱和常规批次测试 多种标准颜色缩短产品开发时间 产品组合里符合标准的颜色用于： - 注射针头ISO 6009 - 眼科容器盖（美国眼科学院 / AAO - American Academy of Ophthalmology） 颜色 潘通色参照 PE 基料 PP 基料 透明PP 基料 PEBA 基料 PC 基料 ABS 基料* — PE0M176031 PP0M176045 ** AH0M415001 NC0M176058 ** SB0M665206 102C PE1M176076 PP1M176060 PP1M176062 AH1M415002 NC1M176058 NC1M176059 SB1M664958 158C PE2M176044 PP2M176046 ** ** NC2M176044 NC2M664912 SB2M664939 199C PE3M176131 PP3M176111 PP3M176113 AH3M415002 NC3M176116 NC3M176122 SB3M665037 196C PE3M176130 PP3M176109 ** AH3M415001 NC3M176117 NC3M665052 SB3M665039 2593C PE4M176023 PP4M176036 PP4M176039 AH4M415001 NC4M176038 NC4M176044 SB4M664978 292C PE5M176155 PP5M176169 ** AH5M415003 NC5M176142 ** SB5M665402 285C PE5M176154 PP5M176171 PP5M176175 AH5M415002 NC5M176143 NC5M176146 SB5M665404 288C PE5M176153 PP5M176173 ** ** NC5M176144 ** SB5M665406 346C PE6M176128 PP6M176111 ** ** NC6M176118 ** SB6M665070 3145C PE6M176126 PP6M176115 ** ** NC6M176119 ** SB6M665068 348C PE6M176127 PP6M176113 PP6M176118 AH6M415001 NC6M176120 NC6M176121 SB6M665072 425C PE7M176066 PP7M176091 PP7M176094 ** NC7M176124 ** SB7M665297 Cool Gray 5C PE7M176067 PP7M176089 ** AH7M415001 NC7M176125 NC7M665175 SB7M665295 7502C PE8M176048 PP8M176058 ** ** NC8M176058 ** SB8M664871 463C/731C PE8M176049 PP8M176060 ** ** NC8M176059 ** SB8M664869 Black C PL9M176008 PP9M176017 ** ** NC9M176008 NC9M176009 SB9M664896 颜色可能与显示的实际颜色有所不同。

主要特性 可用于聚乙烯、聚丙烯、ABS、聚碳酸酯和苯 乙烯 树脂载体的生物含量从70%到100%不等，具 体取决于聚合物⸺按照ASTM D6866标准计 算 由四家通过ISO 13485认证的工厂生产，稳定 的供应链覆盖全球，品质始终如一 变更控制记录的级别高于CAS编号级别，降低 变更风险 可以像加工化石基聚合物般在普通注塑机和挤 出设备上进行产品加工的嵌入式解决方案 可以以即用型预着色或添加剂配方的形式提供 • • • • • • 法规支持 原材料根据以下标准检测： - ISO 10993-1 - 美国药典和（包括VI类） - 欧洲药典，各论3.1.3/3.1.5（聚烯烃包装材 料） - 美国药典（聚乙烯） - 杂质元素符合ICH Q3D要求 注册药品管理档案（III类）和/或器械主文件 食品接触声明符合美国FDA和EU规范 • • • 适用医疗保健使用限制—见下文。 埃万特的产品不为以下目的或用途而设计，也不会宣传或预期用于以下目的或用途： (a) 被美国食品药品监督管理局（FDA）或国际标准化组织（ISO）归类为“植入”类器械的医疗器械；或美国药典（USP）或ISO标准定义的“永久”使用器械；或 (b) 经修订的欧盟指令90/385/EEC中定义的有源植入式医疗器械；或者 (c) 经修订的欧盟指令93/42/EEC中定义的“长期”使用的医疗器械。

主要特性 在三个经ISO 13485认证的生产设施生产，在 全球范围内提供质量稳定一致的产品，并增加 供应稳定性 变更控制记录的级别高于CAS编号级别，降低 变更风险 不含动物源性物质和邻苯二甲酸盐 可用作预着色配方或母粒，用于不同的聚合物 • • • • 注册药品管理档案（III类）和/或医疗器械主 文件 食品接触符合FDA/EU**要求 法规支持 原材料根据以下标准检测： - ISO 10993-1和美国药典 生物学 评估 - 欧洲药典3.1.3/3.1.5（聚烯烃） - 美国药典（聚乙烯） - ICH Q3D 杂质元素 • • • * 设计备注：选择效果颜色时需要仔细考虑零件设计和聚合物流动路径， 从而尽可能减少可见流线。 埃万特的产品不为以下目的或用途而设计，也不会宣传或预期用于以下目的或用途： (a) 被美国食品药品监督管理局（FDA）或国际标准化组织（ISO）归类为“植入”类器械的医疗器械；或美国药典（USP）或ISO标准定义的“永久”使用器械；或 (b) 经修订的欧盟指令90/385/EEC中定义的有源植入式医疗器械；或者 (c) 经修订的欧盟指令93/42/EEC中定义的“长期”使用的医疗器械。

法规支持 经过预测试的原材料： - ISO 10993-1 - USP 第、章（VI类） - USP （指南），6.2.3 可萃取元素； USP - ICHQ3D/USP 2 可萃取金属 - 欧洲药典 3.1 聚烯烃（如适用） FDA发布的注册药品管理档案（III类）和/或医 疗器械管理档案 食品接触符合FDA/EU*要求 • • • 主要特性 在三个通过ISO 13485认证的医疗生产线生产 全球统一的配方，提供全球一致性和供应链保 障 变更控制记录的不限于CAS编号级别，降低变 更风险 不含动物源性物质和邻苯二甲酸盐 标准母粒在PE载体中提供，可根据要求在PP 中提供 可以采用针对应用选择的特定树脂提供预着色 配方 • • • • • 药物类型 颜色说明 潘通色号参考 埃万特产品代码（PE基） 肾上腺素能激动剂组合 浅绿色 373 C PE6M176349 肾上腺素能激动剂 紫色 2583 C PE4M176057 抗感染药 棕褐色 467 C PE8M176130 非甾体类抗炎药 灰色 冷灰色 4 C PE7M176184 甾体类抗炎药 粉色 197 C PE3M176237 免疫调节剂类抗炎药 橄榄绿 5763 C 按要求提供 β-受体阻滞剂 黄色 黄色 C PE1M176160 β-受体阻滞剂组合 深蓝色 281 C PE5M176272 碳酸酐酶抑制剂 橘黄色 1585 C PE2M176089 细胞毒素 黑色 6 C PL9M176008 缩瞳剂 深绿色 348 C PE6M176267 散瞳剂和睫状肌麻痹剂 红色 1797 C PE3M176236 前列腺素类似物 绿松石 326 C PE5M176273 适用医疗保健使用限制—见下文。 埃万特的产品不为以下目的或用途而设计，也不会宣传或预期用于以下目的或用途： (a) 被美国食品药品监督管理局（FDA）或国际标准化组织（ISO）归类为“植入”类器械的医疗器械；或美国药典（USP）或ISO标准定义的“永久”使用器械；或 (b) 经修订的欧盟指令90/385/EEC中定义的有源植入式医疗器械；或者 (c) 经修订的欧盟指令93/42/EEC中定义的“长期”使用的医疗器械。