Because the trays were regularly handled by consumers and filled with food, it was very important that any changes made to the material would not jeopardize the packaging’s FDA compliance. The sheet producer began experimenting with material changes in-house, but struggled to achieve consistency of release.

Buyer shall not place material obtained from a manufacturer other than PolyOne into containers labeled for PolyOne-sourced Product, nor shall Buyer sell or represent as Product any materials made by a manufacturer other than PolyOne. 8.

KEY CHARACTERISTICS • Fabric FX can be formulated to include properties such as UV color protection and anti-scratch performance • Fabric FX can be processed on standard molding machinery • Different matrix materials can be enhanced with Fabric FX, including ABS, PC/ABS, PB, and unfilled or talc-filled PP • There is no limitation on the graining that can be used; the fabric effect will differ depending on the grain effect engraved in the tool • If parts are extruded or a mold is not engraved, final parts will have an attractive speckled appearance, but will not be textured TYPICAL USES Fabric FX concentrates are suitable for any application that could benefit from an enhanced textile-like appearance. Processing conditions can cause material properties to shift from the values stated in the information.

This software is used to predict the material behavior during this process and, as a result, we can provide the potential weight reduction, mechanical properties of the final foamed part, and recommendations for optimal tool design*. Processing conditions can cause material properties to shift from the values stated in the information.

EXTRUSOR Tornillo 3/4" a 6" para polietileno, de filete sencillo y sin sección de mezcla, Relación de compresión 1.5–2:1 Cabezal De presión media: ángulo de 30° a 40° Dado Del tamaño adecuado para una hilera de 1/8" o menos L/D 24:1 recomendado Paquete de mallas Sin paquete de mallas (opcional según la presión) Canal de enfriamiento 50–65°C recomendado Alimentador Preferentemente gravimétrico—3 compartimentos para cross-linked Secador Desecante, 4 horas a 70°C, para el compuesto ECCOH™ solamente; nunca se debe colocar silano seco en los secadores PROCESAMIENTO Temperatura ECCOH Serie 5000 ECCOH Serie 6000 Precalentamiento del alambre 80–120°C 80–120°C Zonas de alimentación 93°C 135°C Transición 135 °C 163°C Dosificación 150°C 190°C Cabezal/dado 165°C 215°C Material fundido 165–170°C 215–225°C Llama a la salida del dado Sí, según sea necesario Velocidad de la línea Sensible a la cizalla: Observar temperatura de fusión, amperaje del motor y presión Compuesto de purga HDPE +1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation. Processing conditions can cause material properties to shift from the values stated in the information.

Suitable for both vertical and horizontal cable systems, the materials offer safe, sustainable and efficient solutions for low voltage power cable systems, including in solar and other specialty market applications. Processing conditions can cause material properties to shift from the values stated in the information.

Organic antimicrobials consist of substances that migrate within the polymer matrix, spreading over the surface of the materials where their antimicrobial action has effect. Processing conditions can cause material properties to shift from the values stated in the information.

Processing conditions can cause material properties to shift from the values stated in the information. CESA LIGHT – STANDARD OFFERINGS POLYMER FAMILY MATERIAL PRODUCT NAME PRODUCT TYPE DOSAGE Polyolefin PEA0820040 CESA Light PEA0820040 Stabilizer/Absorber 0.5–1.2% Polyolefin PRAN698456 CESA Light 7102 Stabilizer 1–4% HOPP PPA0820048 CESA Light PPA0820048 Stabilizer/Absorber 1–2% HOPP PPAN698522 CESA Light 7225 Stabilizer 1–4% Nylon ABA0820033 CESA Light ABA0820033 Stabilizer/Absorber 0.6–1.4% Nylon ABAN698415 CESA Light 1574 Stabilizer 1–2% Polyester FPA0687372 Hiformer™ Blocker (liquid) Absorber to 390 nm 0.05–0.10% Polyester NBA0820025 CESA Light NBA0820025 Absorber 0.5–2% Polycarbonate NCA0820016 CESA Light NCA0820016 Stabilizer/Absorber 0.75–3% Polycarbonate NCA0820017 CESA Light NCA0820017 Absorber 1–5% TPU RUA0820018 CESA Light RUA0820018 Absorber 2–4% TPU RUA0820030 CESA Light RUA0820030 Stabilizer/Absorber 2–4% Styrenic SLA0820013 CESA Light SLA0820013 Stabilizer/Absorber 1–3% Styrenic SLA0820012 CESA Light SLA0820012 Stabilizer 1.5–5% CESA Light additives can be used in combination with other CESA masterbatches, and formulations can be customized for most applications.

Lower let down ratios (LDRs) also help optimize cash flow and material use. Processing conditions can cause material properties to shift from the values stated in the information.

Our material and process experts provide guidance and technical support to transition from paint to MIC and to fulfill both the targeted aesthetics and application requirements. Processing conditions can cause material properties to shift from the values stated in the information.