Vinyl Plastisols Product Bulletin. Key characteristics, benefits and applications of Wear-Resistant Plastisols

Add shimmer and glitter using the same parameters as conventional vinyl plastisol inks

Avient Launches New Global Range of Plastisol Special Effect Screen Printing Inks

Wilflex™ Revive™ Bio Plastisol Inks from Avient Offer Sustainable Solutions for Screen Printing

EXTRUDER Screw 1" to 6" deep flighted metering screw 3:1 compression ratio Tooling Tubing type – zero land (for smaller sizes) Pressure type – for 1" size or larger Die Tubing type – low DDR Pressure type – short land L/D 24:1 or higher Screen Pack 20/40/20 Mesh Cooling Trough 120–150 °F (50–65 °C) recommended Dryer Hot air or desiccant type, 4 hours at 175–185 °F PROCESSING Temperature Wire Preheat None Feed Zones 290–300 °F Transition 320–340 °F Metering 340–350 °F Head/Die 350–365 °F Target Melt 350–365 °F Maximum Melt 390 °F Purge Compound HDPE www.avient.com Copyright © 2020, Avient Corporation.

EXTRUSOR Tornillo Tornillo de regulación de rosca profunda de 1" a 6" Relación de compresión 3:1 Cabezal De tubo: sin hilera (para tamaños pequeños) De presión: para tamaños de 1" o superiores Dado De tubo: bajo coeficiente de estirado De presión: hilera corta L/D 24:1 o superior Paquete de mallas Malla de 20/40/20 Canal de enfriamiento 50–65°C recomendado Secador Aire caliente o desecante, 4 horas a 79–85°C PROCESAMIENTO Temperatura Precalentamiento del alambre Ninguno Zonas de alimentación 143–149°C Transición 160–171°C Dosificación 171–176°C Cabezal/dado 176–185°C Material fundido 176–185°C Fusión máxima 199°C Compuesto de purga HDPE www.avient.com Copyright © 2020, Avient Corporation.

FIBER-LINE™ High Performance Synthetic Fibers PRODUCT SELECTION GUIDE FIBER-LINE™ HIGH PERFORMANCE SYNTHETIC FIBERS Kevlar® Para-Aramid Nomex® Meta-Aramid Vectran® LCP Zylon® PBO Carbon Fiber UHMWPE PET Polyester Fiberglass Novoloid Technora® Filament Yarn TECHNICAL PROPERTIES Standard High Modulus Standard Standard High Standard High Standard Standard High High Tenacity Low Shrink E-Glass S-Glass Standard Standard Breaking Tenacity (g/d) 23.0 23.6 5.0 23.0 30.0 42.0 42.0 23.0 28.0 38 9.3 8.4 6.0 - 7.3 6.7 - 9.4 1.5 28.0 Specific Gravity (Ratio) 1.44 1.44 1.38 1.40 1.40 1.54 1.56 1.80 0.97 0.97 1.38 1.38 2.58 2.48 1.27 1.39 Elongation at Break (%) 3.5 2.5 30.0 3.8 2.8 3.5 2.5 1.5 3.5 3.1 14.6 19.5 3.5 5.5 30.0 - 40.0 4.6 Tensile Modulus (g/d) 555 885 125 600 830 1200 1800 1480 850 1250 120 70 200–275 140–170 2.5–5.0 590 Equilibrium Moisture Regain at 55% RH (%) 5.0 5.0 4.5

Equilibrium moisture regain @ 55% RH ** Creep @ 40%-58% ultimate tensile strength *** Shrinkage in dry air @ 177 C for 30 minutes  LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.

°C 425-480 KEVLAR® PARA-ARAMID (HM) BARE FIBER PERFORMANCE KEVLAR® PARA-ARAMID DATA Standard Modulus High Modulus * Equilibrium moisture regain @ 55% RH ** Creep @ 40%-58% ultimate tensile strength *** Shrinkage in dry air @ 177 C for 30 minutes CHEMICAL COMPATIBILITY Chemical Resistance to Acid: Degrades in Formic, Hydrochloric, and Sodium Hydroxide acid.

TECHNORA® TECHNORA® DATA Standard Modulus * Equilibrium moisture regain @ 55% RH ** Creep @ 40%-58% ultimate tensile strength *** Shrinkage in dry air @ 177 C for 30 minutes  LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.