TAKE THE HEAT FLEX, RETURN, REPEAT PROCESSED & RAW FOOD PHARMACEUTICAL FORESTRY RECYCLED MATERIALS MINED/QUARRIED ROCK, ORE, COAL, SAND POWDER AGRICULTURAL Avient composite springs are tested to 1.5+ million cycles with no loss of spring rate. 1.5+ MILLION CYCLES Avient composite springs maintain performance levels even in high temperature applications up to 300°F. 300° FAHRENHEIT • Composites are up to 70% lighter than steel. • Composites resist corrosion; steel rusts easily unless it is painted or coated. 70% LIGHTER TRADITION OF EXCELLENCE Based on the proven performance of Gordon Glass™, the material of choice in composite archery bow limbs since 1953, our thermoset composite springs deliver unmatched strength & deflection for the most demanding applications.

KEY CHARACTERISTICS • Manufactured under change control principles beyond CAS number (similar level as MEVOPUR concentrates), reducing risk of change • Free from animal-derived substances and phthalates • Suitable for blown film, injection molding, blow molding and extrusion REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 - USP chapters , including Class VI, a requirement for ophthalmic and nasal drugs - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities - USP and USP light transmission • Registered Drug Master File (Type III) • Food contact compliance established with FDA/EU* APPLICATION BULLETIN CARRIER MATERIAL PIGMENT CONTENT/TYPE LIGHT FASTNESS THERMAL STABILITY PRODUCT CODE HDPE 50% TiO2 8 300°C PH00075525 LLDPE 60% TiO2 8 300°C PL00075542 LLDPE 70% TiO2 8 300°C PL00075545 PP 50% TiO2 8 300°C PP00075717 Healthcare use limitations apply—see below.

Injection Molding Parameters Base Resin PPA PPS PA 6/6 PA 12 Barrel Temperatures °F (°C)* Rear Zone 550–580 (288–305) 550–580 (288–305) 440–490 (227–254) 440–480 (227–250) Center Zone 560–600 (293–316) 560–615 (293–324) 470–510 (243–266) 460–510 (238–266) Front Zone 580–620 (304–327) 590–630 (310–333) 490–540 (254–282) 480–520 (250–271) Nozzle 575–615 (302 –324) 600–625 (316–330) 520–570 (271–300) 500–530 (260–277) Melt Temperature °F (°C) 575–615 (302–324) 600–625 (316–330) 520–570 (271–300) 500–530 (260–277) Mold Temperature °F (°C) 250–300 (121–150) 250–300 (121–150) 150–200 (66–93) 150–200 (66–93) Pack and Hold Pressure 50–80% of Injection Pressure Injection Velocity 1.0–3.0 in/sec Back Pressure 25–100 psi Screw Speed 25–75 rpm Drying Parameters °F (°C) 6 hours @ 175 (80) 6 hours @ 300 (150) 3 hours @ 180 (82) 3 hours @ 180 (82) Cushion 0.125–0.250 in Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose Reverse Taper Reverse Taper Clamp Pressure 4–5 tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties.

主要特性 生产符合高于CAS编号级别的变更控制原则 （与MEVOPUR母粒类似），降低变更风险 不含动物源性物质和邻苯二甲酸盐 适用于吹膜、注塑、吹塑和挤出 注册药品主文件（III型） 食品接触符合FDA/EU*要求 法规支持 原材料根据以下法规测试： - ISO 10993-1 - USP第、章，包括VI级别，符合眼 科和鼻腔用药物要求 - 欧洲药典3.1.3/3.1.5（聚烯烃） - 美国药典（聚乙烯） - ICH Q3D 杂质元素 - USP和USP，透光率 载体材料 耐光性 热稳定性 产品代码颜料含量/类型 HDPE 50% TiO2 8 300°C PH00075525 LLDPE 60% TiO2 8 300°C PL00075542 LLDPE 70% TiO2 8 300°C PL00075545 PP 50% TiO2 8 300°C PP00075717 适用医疗保健使用限制—见下文。

PRODUCT BULLETIN VERSAFLEX™ GP 2810-40N AM VERSAFLEX™ CE 3120-65* AM ONFLEX™ LO 7120-45 AM Applications Personal care grips Consumer packaging Consumer electronics Charging stations HVAC seals Cup holder mats Color Natural Natural Natural Durometer, Shore A 45 66 45 Specific Gravity (kg/m3) 0.87 1.14 1.13 Tensile Strength (PSI) 650 1200 585 Elongation % 700 600 685 Modulus @ 300% |(PSI) 260 585 300 Injection Moldable Yes Yes Yes OM Substrate PP PC, ABS, PC/ABS, COPE PP TECHNICAL PROPERTIES *UL listing does not apply; testing can be completed if required by the customer Copyright © 2021, Avient Corporation.

KEY PROPERTIES AND PERFORMANCE FR GRADES H GRADES PEEK GRADES LCP GRADES FLEX GRADES PROPERTIES CONDITION ISO UNIT PPE400FR PPE700FR PPE950FR PPE1200FR H1500HF H2300HF PEEK700 PEEK900 PEEK1000 PEEK1200 LCP650 LCP800 LCP950 FLX400 FLX700 FLX1100 Dielectric Constant (Dk) 2.4 GHz 4.0 7.0 9.5 12.0 15.0 23.0 7.0 9.0 10.0 12.0 6.5 8.0 9.5 4.0 7.0 11.0 Loss Tangent (Df) 2.4 GHz 0.0030 0.0039 0.0042 0.0045 0.0010 0.0037 0.0024 0.0025 0.0024 0.0027 0.0043 0.0045 0.0047 0.0010 0.0009 0.0012 Density 1183 g/cm3 1.44 1.97 2.20 2.50 2.60 3.40 1.94 2.20 2.30 2.40 2.00 2.15 2.30 1.52 1.93 2.50 Melt Flow Index (MFI) 5 kg, 300 °C (unless noted) 1113 g/10 min 17 12 13 5 5 8 15 @ 380 °C 13 @ 380 °C 10 @ 380 °C 6 - - - 11 @ 230 °C 2 @ 230 °C 0.3 @ 230 °C Tensile Strength at Break 23 °C/73 °F 527 MPa 47 52 44 45 23 40 64 62 65 67 75 80 75 11 17 25 Flexural Modulus 23 °C/73 °F 178 MPa 3100 4500 - 9300 2100 5000 6200 7600 9200 11000 8000 8500 8500 1400 1600 2900 Unnotched Izod 23 °C/73 °F 180 kJ/m2 NB 42 20 9 17 10 28 25 18 15 31 20 12 NB NB NB -20 °C/-4 °F 180 kJ/m2 - - - - 17 10 - - - - - - - - - Notched Izod 23 °C/73 °F 180 kJ/m2 14 6 4 3 5 4 6 4 4 4 10 6 4 59 23 13 -20 °C/-4 °F 180 kJ/m2 - - - - 5 4 - - - - - - - - - - STANDARD GRADES RADOME GRADES PROPERTIES CONDITION ISO UNIT PPE260 PPE300 PPE320 PPE350 PPE400 PPE440 PPE500 PPE650 PPE800 PPE950 PPE1200 RS260 RB260 RS265FR Dielectric Constant (Dk) 2.4 GHz 2.6 3.0 3.2 3.5 4.0 4.4 5.0 6.5 8.0 9.5 12.0 2.6 2.6 2.7 Loss Tangent (Df) 2.4 GHz 0.0009 0.0009 0.0010 0.0009 0.0009 0.0009 0.0009 0.0009 0.0009 0.0009 0.0010 0.0009 0.0012 0.0032 Density 1183 g/cm3 1.07 1.18 1.21 1.27 1.43 1.50 1.62 1.86 2.10 2.20 2.40 1.06 1.08 1.09 Melt Flow Index (MFI) 5 kg, 300 °C 1113 g/10 min 15 15 16 14 14 14 15 11 10 4 2 21 16 25 Tensile Strength at Break 23 °C/73 °F 527 MPa 40 45 47 50 50 48 45 43 37 37 36 50 42 52 Flexural Modulus 23 °C/73 °F 178 MPa 2700 2400 2000 2600 2800 2700 2600 2600 2300 2600 2600 2200 2200 2600 Unnotched Izod 23 °C/73 °F 180 kJ/m2 NB NB NB NB NB NB NB NB 50 28 24 NB NB NB -20 °C/-4 °F 180 kJ/m2 NB NB NB NB NB NB NB 50 47 27 25 NB NB NB Notched Izod 23 °C/73 °F 180 kJ/m2 8 55 69 35 22 20 15 9 8 5 4 19 14 11 -20 °C/-4 °F 180 kJ/m2 8 15 20 14 12 10 9 8 8 5 4 10 12 10 PREPERM™ SERIES PROPERTIES CONDITION ISO UNIT 8027 8025 8037 8019 8028 8026 8044 8029 8041 8045 8048 8036 8056 8031 Dielectric Constant (Dk) 1 GHz, 23 °C 3.0 3.1 3.4 3.6 3.8 4.4 4.8 5.3 5.4 5.9 6.0 7.0 7.3 9.0 Loss Tangent (Df) 1 GHz, 23 °C 0.0012 0.0012 0.0008 0.0010 0.0010 0.0010 0.0004 0.0008 0.0006 0.0002 0.0006 0.0007 0.0002 0.0007 Density 1183 g/cm3 1.25 1.26 1.35 1.39 1.45 1.59 1.72 1.75 1.79 1.89 1.88 2.06 2.086 2.25 Melt Flow Index (MFI) 5 kg, 300 °C 1113 g/10 min 16 19 10 11 15 13 10 10 15 15 19 10 18 4.7 Tensile Strength at Break 23 °C/73 °F 527 MPa 59 54 54 62 59 54 52 58 52 45 49 45 37 38 Flexural Modulus 23 °C/73 °F 178 MPa 2780 2560 2850 3060 3350 3700 3157 4300 4320 3137 4150 3370 2560 4200 Notched Izod 23 °C/73 °F 180 kJ/m2 15.3 14 14.8 14 12.6 10.4 9.9 8.6 7.4 7.9 6.6 7.1 6.2 6.8 EDGETEK™ 7600 SERIES Copyright © 2021, Avient Corporation.

Cable constructions using FireCon CPE formulations are suitable for the following UL Standards: UL 13 - Power-Limited Circuit Cables UL 44 - Thermoset-Insulated Wire and Cable UL 62 - Flexible Cords and Cables UL 1277 - Electrical Power and Control Tray Cables with Optional Optical-Fiber Members UL 2250 - Instrumentation Tray Cable KEY CHARACTERISTICS • Retains flexibility at temperatures below 0°C • Resistant to acids, alkalis, oils, fuels and chemical solvents • Excellent balance of physical properties • Suitable for VW1 and tray cable rated applications • Available in UV resistant grades • Available in custom colors MARKETS AND APPLICATIONS • Oil, gas and petroleum applications • Tray cable • Industrial cable • Low-voltage power cables • Medium-voltage power cables • Control cables • VW1 applications PRODUCT BULLETIN To learn more about FireCon CPE jacketing solutions, contact Avient at 1.844.4AVIENT www.avient.com FIRECON™ CPE 30-33 RoHS CPE 37-36 RoHS CPE 37-31 RoHS CPE 37-31 RoHS Natural Specific Gravity 1.31 1.38 1.39 1.39 MFI (190°C, 21.6 Kg) 15 22.4 34.3 34 Durometer Hardness 39D 31D 34D 34D Tensile Strength, PSI 1,499 2,200 2,096 1,800 Tensile Elongation (%) 350 300 325 300 UL Temperature Rating °C 90 90 90 90 LOI (% Oxygen) 30 37 37 37 Brittleness Temperature °C -33 -36 -31 -31 TECHNICAL PROPERTIES Copyright © 2020, Avient Corporation.

Glasforms™ CRTM™ composite panels replace steel doors on railcar auto carriers, saving up to 300 lb. per railcar.

300

Onus Managing Director DEKRA Certification, Inc. 1945 The Exchange SE #300 Atlanta, GA 30339 USA (215) 997-4519 https://www.dekra.us/en/audits/ DEKRA Certification Inc. is an accredited Aerospace Registration Management Program Certification Body, under the ICOP scheme.