Zone 2 - Center 420°F 460°F 215°C 235°C Zone 3 - Front 430°F 470°F 220°C 240°C Nozzle 440°F 480°F 225°C 250°C MELT & MOLD TEMPERATURES ENGLISH (°F) METRIC (°C) COMMENTS Melt Temperature 440°F 480°F 225°C 250°C Wipe down mold surface after each production run. DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

PDI) on extruded profiles 2 ASTM D-638 3 ASTM 256 4 ASTM D-648 66 psi, unannealed, 0.125" 5 Savings depends on profile size and production volume Acrylite is a registered trademark of Evonik Performance Materials Lens Performance Resilience™ LS Frost PVC Acrylite® Satinice Frost PMMA Light Transmission1 at 0.060" (1.5mm) 83% Low Diffusion 78% Medium Diffusion 75% High Diffusion 81% Low Diffusion Diffusion Half Power Angle (DLD) 26° Low Diffusion 41° Medium Diffusion 58° High Diffusion 26° Low Diffusion Tensile Strength2 Tensile Modulus2 Tensile Elongation (break)2 7,360 psi 400,000 psi 20% 7,330 psi 330,000 psi 43% Flammability (UL 94) V-0 @ 1.5mm 5VA @ 2.0mm HB @ 1.6mm Notched Izod Impact (73°F)3 2.3 ft-lb/in 0.6 ft-lb/in Heat Deflection Temperature4 157°F/69°C 182°F/83°C UV Stability Good Excellent Chemical Resistance Excellent Good Typical Lens Profile Cost 10–15% Savings5 Baseline 1.866.POLYONE www.polyone.com Copyright © 2018, PolyOne Corporation.

AFNOR M 2 in France, DIN 4102 B 2 – B 1 in Germany, UNI 8457 – 9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3-5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.

Dispute Reason Avient's reason for disputing the invoice 2 Column Description Actions Click on the Edit ( ) or Delete ( ) icon to edit or delete an invoice. Go to the Orders page or, on the Invoices page, click the Create Invoice from PO button above the table to go to the Orders page 2. Click on the Create Credit Note button above the Invoices table on the Invoices page or, on the Orders page, click on the Create Credit Note ( ) icon in the Actions column of the Purchase Orders table. 2.

Notificación desde Registro HUESCA 2 MERC PLAZA CONCEPCION ARENAL,3 2º A 22002 - HUESCA NOTIFICACIÓN DE INSCRIPCIÓN TOTAL Se pone en su conocimiento que el documento del día veinticinco de enero de dos mil veintidós, que fue presentado el día veintisiete de enero de dos mil veintidós, con el número de entrada 1/2022/233,0, diario 46, asiento 131, ha sido inscrito con fecha diecisiete de febrero de dos mil veintidós, en el tomo 661, folio 67, inscripción 5 con hoja HU-13568, de la entidad AVIENT SÀ RL SUCURSAL EN ESPAÑA. HUESCA 2 MERC PLAZA CONCEPCION ARENAL,3 2º A 22002 - HUESCA A los efectos del Reglamento General de Protección de Datos 2016/679 del Parlamento Europeo y del Consejo, de 27 de abril de 2016, relativo a la protección de las personas físicas en lo que respecta al tratamiento de datos personales y a la libre circulación de estos datos (en adelante, "RGPD"), queda informado: - De conformidad con la instancia de presentación, los datos personales expresados en la misma y en los documentos presentados han sido y serán objeto de tratamiento e incorporados a los Libros y archivos del Registro, cuyo responsable es el Registrador, siendo el uso y fin del tratamiento los recogidos y previstos expresamente en la normativa registral, la cual sirve de base legitimadora de este tratamiento. HUESCA 2 MERC PLAZA CONCEPCION ARENAL,3 2º A 22002 - HUESCA Este documento ha sido firmado con firma electrónica reconocida por Dña.

A range of standard and customized solutions conforming to UL 94 V-2, V-0 and 5VA performance ratings are available. KEY CHARACTERISTICS • UL 94 V-2, V-0, 5VA ratings and elevated RTI ratings • GWFI (IEC 60695-11-10) up to 960°C • Comparative Tracking Index (CTI) PLC 0, 600V ratings • Injection molding and extrusion grades • Non-halogen grades available • Low dielectric performance with selected formulations • Good recyclability • Colorable MARKETS & APPLICATIONS Applications that require flame retardant performance including: • Transportation: Interior components, seat components, door panels, aircraft interiors, railway interiors, boat interiors • Construction & Building Materials: Cable insulation, pipes and fittings, insulation materials • Consumer – Appliance casings, housings, covers, fume hoods, battery packages, furniture • Industrial Equipment: Machine housings • Energy, Electrical & Electronic, E-Mobility: Battery frames, electrical housings, connectors • Telecommunication: Cable management • Packaging: Transportation of sensitive goods • Healthcare: Medical device housings and components PRODUCT BULLETIN MAXXAM FR FLAME RETARDANT POLYOLEFIN FORMULATIONS Non-halogenated Halogenated PP Homopolymer Copolymer Homopolymer Copolymer Unit Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Characteristic Talcum Talcum Talcum Talcum Reinforcement Mass-% 0 5–30 5–30 0 20–30 5-20 0 5–30 5–20 0 5–30 5–20 Colorable – ++ ++ + ++ ++ + + + + + + + Density g/cm3 0,9–1,08 1,28–1,37 0,98–1,55 0,92–1,06 1,25–1,35 0,95–1,28 0,94–1,04 1,3–1,55 1,01–1,42 0,96–1,01 0,94–1,58 0,95–1,46 Tensile Strength MPa 25–30 30–70 25–35 16–22 40–65 15–25 25-–35 30–70 25–35 20–24 20–55 -25 E-Modulus (Tensile) MPa 1600–2500 2500–8200 2500–4000 800–1200 2000–8000 1600–3000 1300–2000 3000–8900 1900–3500 1000–1400 1200–7500 1500–3000 Izod Impact 23°C notched % 2,0–4,5 3,5–7,5 2,5–4,5 5–40 2,5–18 2,5–6 2,5–4,5 3,5–6,0 3,0–7,0 4,0–40 2,5–16 2,5–10 Max. Good chemical resistance. 1 IM: Injection Molding, EX: Extrusion, BM: Blow Molding 2 HS: Heat Stabilized, UV: UV Stablized, LM: Lasermarking.

APPLICATION BULLETIN IMPROVED CHEMICAL RESISTANCE Engineered polyketone delivers excellent performance against aggressive chemicals, like H2SO4 for batteries (Figure 1), and performs similarly to nylon against typical chemicals tested in powersports, such as gasoline* (Figure 2). Gasoline - 30% glass-filled (GF) grade, dry as molded (DAM), room temperature Testing methodology is an adaptation from ASTM D543 • Reapply freshly soaked gauze pad every 24 hours to prevent from drying out • Repeat for a total of 72 hours • Tensile properties recorded *Chemical resistance data for DEET, motor oil, glass cleaner, and sunscreen available upon request KEY CHARACTERISTICS Figure 1 Figure 2 3.34 3.84 3.63 1.96 2.21 0.99 3.43 3.86 3.93 1.76 3.49 2.01 3.26 3.66 3.74 1.45 1.06 0.989 2.98 3.99 3.41 1.41 1.07 0.88 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 30% LGF PKE 30% LGF PA6 30% LGF PA66 30% SGF PKE 30% SGF PA6 30% SGF PA66 Ft -lb /in Notched Izod Impact ASTM D256 23C DAM 23C Conditioned -40C DAM -40C Conditioned 1.47 1.37 1.37 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Glass-Filled PKE Glass-Filled PA6 Glass-Filled PA66 g/ cm 3 Density of Polyketone vs Nylon ASTM D792 LESS MOISTURE ABSORPTION THAN NYLON 30% Short Glass Fiber (SGF) Comparison Moisture uptake, environmental chamber 62% RH, 70°C SIMILAR DENSITY TO NYLON ASTM D792 COMPARABLE AND CONSISTENT IMPACT PERFORMANCE* Notched Izod Impact (ASTM D256) of LGF and SGF for DAM and Conditioned Materials *3,000 hr weathering data available upon request KEY CHARACTERISTICS 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

X ET-39568-01A1-2 Natural BROWN MS CAP W/IONMER 2 AH YELLOW 137C 2 SC

MC-61751PP ORANGE 849092/C1378 Q510-3-2 MC-61789PP ORANGE Q100-2-1 5YR UV 831397 MC-61790PP ORANGE Q080-2-1 5YR UV 831398

Standard formulations conforming to UL 94 V-2, V-0 and 5VA performance ratings are available, with many in the portfolio offering elevated Relative Thermal Index (RTI) ratings. UL 94 V-2, V-0, 5VA ratings and elevated RTI ratings Non-halogen, UL94 V-2, and V-0 rated formulations