Copyright © 2021, Avient Corporation.

Sink Marks Melt too hot Insufficient material volume • Increase shot size • Increase packing pressure Part geometry too thick • Reduce wall thickness • Reduce rib thickness Flash Injection pressure too high • Decrease injection pressure • Increase clamp pressure • Increase transfer position Excess material volume • Decrease pack pressure • Decrease shot size Melt and/or mold temperature too hot Loose clamp • Reset mold height • Increase clamp tonnage Shrink Too much shrink • Increase cooling time Too little shrink • Decrease cooling time Burning • Reduce decompression • Clean, widen and increase number of vents • Increase gate size to reduce shear Wet material • Verify material is dried at proper condition Nozzle Drool Nozzle temperature too hot • Decrease nozzle temperature • Decrease back pressure • Increase screw decompression • Verify material has been dried at proper conditions Incorrect nozzle • Use reverse taper tip Weld Lines Melt front temperatures are too low • Increase pack and hold pressure • Increase gate size • Identify end of fill pattern and verify proper vent location • Add vents or increase vent width • Move gate location Warp • Reduce injection speed • Increase pack pressure • Increase pack time • Increase cool time Mold design • Non-uniform mold cooling Part design • Non-uniform wall thickness Thermolator incorrect temperature • Check settings • Inspect thermocouple Sticking in Mold Overfilled cavity • Decrease injection rate and pressure • Decrease hold pressure • Decrease cooling time Part too hot • Decrease barrel temperature • Increase cooling time • Increase draft angle • Polish cores in direction of ejection Black Specks Contamination • Purge machine Degradation • Reduce melt temperature • Reduce screw speed • Reduce back pressure Machine related • Check for wear on screw, barrel or check ring Delamination • Purge barrel to eliminate material contamination • Reduce sharp corners in material flow path • Increase venting Discoloration Oversheared material • Decrease melt temperature • Reduce residence time Mold design • Increase gate sizing Dry material • Check moisture of material to ensure it is within the recommended moisture percentage for molding 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

CARACTERÍSTICAS • Curación a temperatura ambiente • Pirorresistencia • Resistente al calor, el aceite, la fluencia lenta y la abrasión • Propiedades de baja temperatura • Temperature rating por arriba de 125°C • Baja inversión de capital • Alta velocidad de extrusión • Incluidos en boletines de UL/CSA www.avient.com Copyright © 2023, Avient Corporation.

FOOD CONTACT PRODUCT EU FDA MERCOSUR CHINA ColorMatrix AAzure • • • 2022 25% reduction in energy consumed during the bottle blowing process, based on a commercial process producing 8.5g 0.5L water bottles at 51,000 bph 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

For certain ranges, the following colors are also available for short-term delivery. 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.

The images shown in this brochure are intended as an illustration only. 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

CARACTERÍSTICAS PRINCIPALES • Diseñado para ofrecer una mejor vida útil, ergonomía y diferenciación • Botellas más livianas • Menos costo del sistema que otros envases rígidos MERCADO OBJETIVO Y APLICACIONES Envases para lácteos UHT BENEFICIOS TECNOLÓGICOS • Envases monocapa con bloqueo de luz visible del 100 % • Reciclable con flujo de desechos PET general, aunque también se puede encontrar aditivo • Menos costo del sistema • Ofrece una diferenciación de forma de los envases • Permite un diseño de los envases que incremente la facilidad de vertido • Útil para envases resellables • Útil para envases que se pueden almacenar en posición horizontal después de la apertura • Ofrece botellas PET más livianas sin reducir el rendimiento de bloqueo luz Copyright © 2022, Avient Corporation.

Contact your Avient representative with questions or for additional support. 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.

For further advice on how to use ColorMatrix Joule fast reheat dispersion products, and for details of their regulatory status and any other queries, please contact your local ColorMatrix sales representative or visit our website at www.avient.com www.avient.com Copyright © 2020, Avient Corporation.

% Solids Color Index pH Typical Lightfastness GREEN HCC-12172 Phthalocyanine BS 17 1.07 PG-7 1 I/O HCC-12173 Phthalo Brominated VYS 25 1.16 PG-36 1 I/O HCC-10562 Phthalocyanine YS 30 1.15 PG-7 1 I/O HCC-12176 Chromium Oxide 80 2.8 PG-17 1 I/O VIOLET/MAGENTA HCC-17680 (c) Ultramarine Violet 50 1.46 PV-15 1 I/O HCC-2170 (b) Quinacridone Violet 30 1.09 PV-19 2 I/O HCC-14562 Quinacridone Magenta 25 1.06 PR-122 2 I/O HCC-26775 Benzimidazolone 20 1.03 PV-32 2 I/O HCC-33159 (a) Carbazole Violet 12 1.03 PV-23 2 I/O BROWN/TAN HCC-1286 (b) Iron Oxide, Tan HR 60 1.85 PBr-11 1 I/O HCC-12201 Iron Oxide, Light 71 2.21 PBr-6 2 C I/O HCC-12202 Iron Oxide, Dark 67.5 2.06 PBr-6 2 C I/O BLACK HCC-12203 Furnace-High Jet 18 1.06 PBk-7 1 I/O HCC-12204 Furnace-High Jet 6 1 PBk-7 1 I/O HCC-12205 Furnace-Low Jet 34 1.15 PBk-7 1 I/O HCC-12206 Furnace-Medium Jet 20 1.07 PBk-7 1 I/O HCC-18654 Furnace-Ultra High Jet 15 1.04 PBk-7 1 I/O HCC-14674 Iron Oxide 59 1.82 PBk-11 2 C I/O ALUMINUM HCC-12177 Aluminum 50 1.43 PM-1 2 I/O HCC RS = Red Shade YS = Yellow Shade VYS = Very Yellow Shade BS = Blue Shade VBS = Very Blue Shade GS = Green Shade NC = Non-Crystallizing HR = Heat-Resistant (a) = Potential Bleed / Migration (b) = ESO plasticizer (Epoxidized Soybean Oil) (c) = Pigment may fade in acidic environment LIGHTFASTNESS I = Indoor Only I/O = Indoor or Outdoor Mass = Outdoor Masstone Application Only C = Some Caution Advised HEAT STABILITY 1 = Above 400°F 2 = 350°F–400°F 3 = Below 350°F C = Some Caution Advised www.avient.com Copyright © 2020, Avient Corporation.